Application Timeline

Microcement
Application Process Microcement Coating Over Existing Tile — Bathroom Floor

Renewing the bathroom floor with microcement over existing tiles without removal. The six stages below show the sequence from preparation to full curing, number of coats, and critical waiting rules.

Steps
06
Method
Over Tile
Critical
3 days cure
  1. 01

    Surface Preparation & Primer Application

    Yüzey Hazırlığı ve Astar Uygulaması

    Primer · 1 coat Dust removal Drying wait
    TR

    Zemin tamamen temizlenip tozdan arındırıldıktan sonra, mikrobetonun yüzeye mükemmel tutunmasını sağlamak için astar (primer) uygulanır ve kurumaya bırakılır.

    EN

    After the floor is completely cleaned and freed from dust, a primer is applied to ensure perfect adhesion of the microcement to the surface, and it is left to dry.

  2. 02

    Base Material Application · 2 Coats

    Base Material Uygulaması

    Base · 2 coats Coarse grain Inter-coat sanding
    TR

    Zeminin ana mukavemetini oluşturmak için kalın taneli "base" malzeme uygulanır. İlk kat kuruduktan sonra zımparalanır, ardından ikinci kat uygulanır.

    EN

    A coarse-grained "base" material is applied to create the main strength layer. Once the first coat dries, it is lightly sanded, followed by the second coat.

  3. 03

    Colored Microcement Application · 2 Coats

    Renkli Mikrobeton Uygulaması

    Colored coat · 2 coats Final texture Sanding
    TR

    İlk kat renkli mikrobeton çekilir, kuruduktan sonra zımparalanır. Ardından son dokuyu oluşturacak ikinci kat uygulanır ve tamamen kurumaya bırakılır.

    EN

    The first coat of colored microcement is applied, dried, and sanded. Then the second coat is applied to create the final texture and left to dry completely.

  4. 04

    Sealer Application · 2 Coats

    Sealer Uygulaması

    Sealer · 2 coats Pore closing Pre-varnish
    TR

    Mikrobetonun doğal gözeneklerini kapatmak ve vernik aşamasına hazırlamak için iki kat sealer uygulanır.

    EN

    Two coats of sealer are applied to close the natural pores of the microcement and prepare it for the varnishing stage.

  5. 05

    PU Varnish Application · 2–3 Coats

    PU Vernik Uygulaması

    PU varnish · 2–3 coats Water & wear protection Inter-coat drying
    TR

    Zemini suya ve aşınmaya karşı koruyacak olan Poliüretan (PU) vernik 2 veya 3 kat halinde uygulanır. Her katın arası mutlaka kurumalıdır.

    EN

    Polyurethane (PU) varnish is applied in 2 or 3 coats to protect against water and wear. Each coat must dry completely before the next one.

  6. 06

    Curing & Protection · 3 Days No Contact

    Kürlenme ve Koruma

    3 Days no contact 3 days · no foot traffic · no water
    Full curing No stepping No water
    TR

    DİKKAT: Tüm işlemler bittikten sonra tam kürlenme için zemine 3 gün boyunca kesinlikle basılmamalı ve su değdirilmemelidir.

    EN

    ATTENTION: Once all steps are completed, the floor requires a strict 3-day period with no foot traffic and no exposure to water for complete curing.